Проекты

Проблема: 12 injection machines frequently stopped in summer due to high oil temperature.
Решение: 3 units of AC-15 air-cooled chillers with independent oil circuits.
Результат: Stoppages down 90%, defect rate cut by 30%.

Проблема: 10 blow molding machines running in the same workshop: in summer the hydraulic oil exceeded 65 °C, parison temperature drifted and bottle wall thickness went out of tolerance, with frequent overheat shutdowns.
Решение: 2 units of AGD-15IW water-cooled chillers, with separate temperature control loops for hydraulic oil and molds, supplying chilled water at a constant setpoint to keep oil temperature and parison temperature stable.
Результат: Oil temperature held below 50 °C, wall thickness back within tolerance, zero summer shutdowns due to heat, and a sharp drop in scrap rate.

Проблема: Fluctuations in cooling water temperature, dimensional deviations, and material scorching during PVC profile shaping
Решение: AGD-30IW
Результат: The product issues have been completely resolved, and the boss is very satisfied.

Что можно проверить

📜

Сертификаты

Достаточно модели или мощности, мы предложим нужный агрегат.